U.S.NAVY straight knife blade BLACK

• legendary fighting knife U.S. Navy
• smooth, blackened blade (Epoxy-coated)
• kind of steel: carbon 1095 (56-58HRC) stainless steel
• handle of layered, polished leather
• Blade Length: 17.8 cm
• total length: 30.2 cm
• Weight: 306 g
• comes in a leather case with logo U.S. NAVY

Steel 1095: is high carbon steel, which is usually their knees in water with a maximum hardness up to 66 HRC, and has good abrazivzdornost and fracture toughness. Small steel hardenability this refers to the production of thin metal blades. In terms of grain fracture is steel according to ASTM 9 level. The values ??of mechanical properties (ductility in torsion, Charpy tests on samples without notch depending on the quenching temperature, deformation values ??depending on the voltage at different quenching temperature) are available on the web. sites. Embrittlement, which occurs during tempering temperature of about 260 ° C (final hardness is about 60 HRC) is a general problem of carbon and alloy steels with low alloying addition. That the annealing temperature is consistently avoid cutler! Since the tempering does not expected toughness at lower temperatures and at higher results in too low strength turns to processors for steels with lower carbon having improved toughness at low temperatures, and tested bainite hardening. Most manufacturers (Tramontina, Ontario, TOPS, Mora) recommends the use of this material utmost care (due to the high hardness of the blade) in the final grinding operation (there is his chipping) and in thin preparations threatens lattice deformation. For these reasons, it is recommended for smaller steel blade.